Configuration

The first time you start up your Bob, you'll need to configure it.

Step 1

To navigate within the interface, use the side buttons, then confirm your choice with the middle button.

Step 2

Select language.

Step 3

Accept the general terms of use (GTU) available on the website www.daan.tech).

Step 4

Select filling mode.

Step 5

Select the tune and volume.

Step 6

Choose the colour of the light.

Step 7

Connect your Bob to the Wi-Fi.

Step 8

To properly insert the Bob cassette into the hatch under the door, you must first remove the red plugs before inserting it the right way round.