The maintenance cycle

1

Part 1 of 2

Periodic maintenance table

Maintenance

Frequency

Equipment

Large waste filter

After each wash

Dispose of residue and rinse under clear water

Filters (set)

Once a week or every 10 cycles

Water + degreaser Soft bristle brush

Heating disc

Once a month or every 30 cycles

Non-abrasive sponge Degreaser

Piping and inner tank

Every 3 months or 90 cycles

Use the Rock'n'Roll cassette

Casing, screen and buttons

Regularly

Damp cloth

warning

Warning

Do not use abrasive products, chemical solvents or strong detergents.

2

Part 2 of 2

The maintenance cycle :

For impeccable dishes, maintenance is essential. Be sure to clean Bob every 3 months or 90 cycles with the rock'n'roll cassette.

The cycle lasts 60 minutes, cleans thoroughly and removes limescale :

  1. Pumps, wash arms, hoses, basket... the entire contents of the cassette are delivered during the maintenance cycle.
  2. Each rock'n'roll cassette is single-use (all contents are used during the rock'n'roll cycle).
  3. Remove all the dishes inside Bob.
  4. Clean the filters then put them back.
  5. Insert the rock'nroll cassette into your Bob. Start the maintenance cycle from the settings menu.

Compartment 1

Compartment 2 

Function

Cleaning agent for Bob (30ml / 1 dose) For maintenance of pipes, hoses and pumps. UFI: 9AD7-407V-T002-0TTS. Product code: 2671-035-1.

Bob maintenance product (capacity 130ml / 1 dose) Concentrated formula cleans your Bob thoroughly and eliminates limescale to prevent damage, improving the longevity of your Bob. UFI: CM57-N0DW-W00G-D6CR. Product code: FS CLP2593

Composition

SODIUM HYDROXIDE and ETIDRONIC ACID. Less than 5%: phosphonate and polycarboxylates. 

METHANE SULFONIC ACID.